 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Aluminum Electrolytic Capacitors/ NHG Radial Lead Type Series: NHG Type: A Features Endurance : 105 C 1000 h to 2000 h RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan -55 C to +105 C 6.3 V.DC to 100 V.DC 0.1 F to 22000 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Which is greater) I < 0.06 CV +10 (A) After 2 minutes -25 C to +105 C 160 V.DC to 450 V.DC 1.0 F to 330 F Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Endurance Duration : 6.3 V.DC to 100 V.DC : (5 to 8)=1000 hours, (10 to 18)=2000 hours 160 V.DC to 450 V.DC : 2000 hours Capacitance change 20 % of initial measured value tan < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) Cap. (F) 0.1 to 6.3 to 100 160 to 450 47 1000 1 to to 33 470 330 Frequency (Hz) 60 0.75 0.80 0.85 0.80 120 1.00 1.00 1.00 1.00 1k 1.55 1.35 1.10 1.35 10 k 1.80 1.50 1.15 1.50 100 k 2.00 1.50 1.15 1.50 to 22000 Dimensions in mm (not to scale) [mm] Sleeve Pressure relief 6.3< d0.05 5 to 8 10< + - L L<16 : L1.0 L>20 : L2.0 14 min. 3 min. D0.5 F0.5 D0.5 (mm) Body Dia. D Lead Dia. d Lead space F 5 0.5 2.0 6.3 0.5 2.5 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 18 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Apr. 2008 Aluminum Electrolytic Capacitors/ NHG Standard Products Case size W.V. Cap. (20 %) (F) 220 470 1000 2200 3300 4700 6800 10000 15000 22000 330 470 1000 2200 3300 4700 6800 10000 15000 100 220 330 470 1000 2200 3300 4700 6800 10000 47 100 220 330 470 1000 2200 3300 4700 6800 47 100 220 330 470 1000 2200 3300 4700 Dia. (mm) 5 6.3 8 10 10 12.5 12.5 16 16 18 6.3 8 10 10 12.5 12.5 16 16 18 5 6.3 8 8 10 12.5 12.5 16 16 18 5 6.3 8 8 10 10 12.5 16 16 18 5 6.3 8 10 10 12.5 16 16 18 Specification Lead Length Ripple tan Endur- Lead Lead Space Current ance Dia. Length Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 11 140 0.28 1000 0.5 2.0 5.0 2.5 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 11.5 380 0.28 1000 0.6 3.5 5.0 16 710 0.30 2000 0.6 5.0 5.0 20 840 0.32 2000 0.6 5.0 5.0 20 1090 0.34 2000 0.6 5.0 5.0 25 1350 0.38 2000 0.6 5.0 5.0 25 1650 0.46 2000 0.8 7.5 7.5 31.5 2010 0.56 2000 0.8 7.5 35.5 2350 0.70 2000 0.8 7.5 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 11.5 250 0.24 1000 0.6 3.5 5.0 12.5 460 0.24 2000 0.6 5.0 5.0 20 760 0.26 2000 0.6 5.0 5.0 20 1000 0.28 2000 0.6 5.0 5.0 25 1260 0.30 2000 0.6 5.0 5.0 25 1570 0.34 2000 0.8 7.5 7.5 31.5 1890 0.42 2000 0.8 7.5 35.5 2180 0.52 2000 0.8 7.5 11 110 0.20 1000 0.5 2.0 5.0 2.5 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 11.5 260 0.20 1000 0.6 3.5 5.0 11.5 310 0.20 1000 0.6 3.5 5.0 16 560 0.20 2000 0.6 5.0 5.0 20 920 0.22 2000 0.6 5.0 5.0 25 1170 0.24 2000 0.6 5.0 5.0 25 1480 0.26 2000 0.8 7.5 7.5 31.5 1780 0.30 2000 0.8 7.5 35.5 2060 0.38 2000 0.8 7.5 11 91 0.16 1000 0.5 2.0 5.0 2.5 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 11.5 230 0.16 1000 0.6 3.5 5.0 11.5 310 0.16 1000 0.6 3.5 5.0 12.5 380 0.16 2000 0.6 5.0 5.0 20 680 0.16 2000 0.6 5.0 5.0 25 1090 0.18 2000 0.6 5.0 5.0 25 1400 0.20 2000 0.8 7.5 7.5 31.5 1750 0.22 2000 0.8 7.5 35.5 2040 0.26 2000 0.8 7.5 11 90 0.14 1000 0.5 2.0 5.0 2.5 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 11.5 270 0.14 1000 0.6 3.5 5.0 12.5 350 0.14 2000 0.6 5.0 5.0 16 460 0.14 2000 0.6 5.0 5.0 20 810 0.14 2000 0.6 5.0 5.0 25 1260 0.16 2000 0.8 7.5 7.5 31.5 1610 0.18 2000 0.8 7.5 35.5 1910 0.20 2000 0.8 7.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 (pcs) 2000 2000 1000 500 500 500 500 250 (V) 6.3 10 16 25 35 ECA0JHG221( ) ECA0JHG471( ) ECA0JHG102( ) ECA0JHG222( ) ECA0JHG332( ) ECA0JHG472( ) ECA0JHG682( ) ECA0JHG103( ) ECA0JHG153 ECA0JHG223 ECA1AHG331( ) ECA1AHG471( ) ECA1AHG102( ) ECA1AHG222( ) ECA1AHG332( ) ECA1AHG472( ) ECA1AHG682( ) ECA1AHG103 ECA1AHG153 ECA1CHG101( ) ECA1CHG221( ) ECA1CHG331( ) ECA1CHG471( ) ECA1CHG102( ) ECA1CHG222( ) ECA1CHG332( ) ECA1CHG472( ) ECA1CHG682 ECA1CHG103 ECA1EHG470( ) ECA1EHG101( ) ECA1EHG221( ) ECA1EHG331( ) ECA1EHG471( ) ECA1EHG102( ) ECA1EHG222( ) ECA1EHG332( ) ECA1EHG472 ECA1EHG682 ECA1VHG470( ) ECA1VHG101( ) ECA1VHG221( ) ECA1VHG331( ) ECA1VHG471( ) ECA1VHG102( ) ECA1VHG222( ) ECA1VHG332 ECA1VHG472 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 500 500 500 250 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ NHG Standard Products Specification Lead Length Ripple tan Endur- Lead Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (hours) (mm) (mm) (mm) (mm) (V) (F) (mm) (mm) (mA r.m.s.) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 50 22 33 47 100 220 330 470 1000 2200 3300 10 22 33 47 63 100 220 330 470 1000 2200 0.47 1 2.2 100 3.3 4.7 10 22 5 5 5 5 5 5 5 5 5 5 5 6.3 8 10 10 10 12.5 16 18 5 5 6.3 6.3 10 10 10 12.5 16 18 5 5 5 5 5 6.3 6.3 11 11 11 11 11 11 11 11 11 11 11 11.2 11.5 12.5 16 20 25 31.5 35.5 11 11 11.2 11.2 12.5 16 20 20 25 35.5 11 11 11 11 11 11.2 11.2 1.1 2.3 3.5 5 10 18 22 26 39 65 90 110 180 300 410 530 950 1470 1770 46 71 100 120 215 335 510 640 930 1610 9 14 21 31 38 54 93 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.08 0.08 0.08 0.08 0.08 0.08 0.08 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 1000 1000 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.0 2.5 2.5 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.0 2.0 2.0 2.0 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Case size Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) ECA1HHG0R1( ) ECA1HHGR22( ) ECA1HHGR33( ) ECA1HHGR47( ) ECA1HHG010( ) ECA1HHG2R2( ) ECA1HHG3R3( ) ECA1HHG4R7( ) ECA1HHG100( ) ECA1HHG220( ) ECA1HHG330( ) ECA1HHG470( ) ECA1HHG101( ) ECA1HHG221( ) ECA1HHG331( ) ECA1HHG471( ) ECA1HHG102( ) ECA1HHG222 ECA1HHG332 ECA1JHG100( ) ECA1JHG220( ) ECA1JHG330( ) ECA1JHG470( ) ECA1JHG101( ) ECA1JHG221( ) ECA1JHG331( ) ECA1JHG471( ) ECA1JHG102( ) ECA1JHG222 ECA2AHGR47( ) ECA2AHG010( ) ECA2AHG2R2( ) ECA2AHG3R3( ) ECA2AHG4R7( ) ECA2AHG100( ) ECA2AHG220( ) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 500 500 500 500 250 (pcs) 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 500 500 500 500 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ NHG Standard Products Specification Lead Length Ripple tan Endur- Lead Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (hours) (mm) (mm) (mm) (mm) (V) (F) (mm) (mm) (mA r.m.s.) 33 47 100 220 330 470 1000 1 2.2 3.3 4.7 10 22 33 47 100 220 330 1 2.2 3.3 4.7 10 22 33 47 100 220 1 2.2 3.3 4.7 10 22 33 47 100 1 2.2 3.3 4.7 10 22 33 47 100 8 10 10 12.5 16 16 18 6.3 6.3 6.3 6.3 10 10 10 12.5 16 16 18 6.3 6.3 6.3 8 10 10 12.5 12.5 16 18 6.3 6.3 8 8 10 12.5 12.5 12.5 16 6.3 8 10 10 10 12.5 16 16 18 11.5 12.5 20 25 25 25 35.5 11.2 11.2 11.2 11.2 12.5 20 20 20 25 31.5 31.5 11.2 11.2 11.2 11.5 16 20 20 20 25 31.5 11.2 11.2 11.5 11.5 16 20 20 25 31.5 11.2 11.5 12.5 16 20 20 25 25 31.5 130 165 265 440 540 715 985 17 25 36 43 70 130 180 220 335 540 705 17 25 36 50 80 140 190 220 335 575 17 29 42 50 88 155 190 230 365 18 31 38 50 82 130 195 230 375 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 3.5 5.0 5.0 5.0 7.5 7.5 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 2.5 2.5 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 3.5 3.5 5.0 5.0 5.0 5.0 7.5 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 Case size Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) ECA2AHG330( ) ECA2AHG470( ) ECA2AHG101( ) ECA2AHG221( ) ECA2AHG331( ) ECA2AHG471( ) ECA2AHG102 ECA2CHG010( ) ECA2CHG2R2( ) ECA2CHG3R3( ) ECA2CHG4R7( ) ECA2CHG100( ) ECA2CHG220( ) ECA2CHG330( ) ECA2CHG470( ) ECA2CHG101( ) ECA2CHG221 ECA2CHG331 ECA2DHG010( ) ECA2DHG2R2( ) ECA2DHG3R3( ) ECA2DHG4R7( ) ECA2DHG100( ) ECA2DHG220( ) ECA2DHG330( ) ECA2DHG470( ) ECA2DHG101( ) ECA2DHG221 ECA2EHG010( ) ECA2EHG2R2( ) ECA2EHG3R3 ECA2EHG4R7( ) ECA2EHG100( ) ECA2EHG220( ) ECA2EHG330( ) ECA2EHG470( ) ECA2EHG101 ECA2VHG010( ) ECA2VHG2R2( ) ECA2VHG3R3( ) ECA2VHG4R7( ) ECA2VHG100( ) ECA2VHG220( ) ECA2VHG330( ) ECA2VHG470( ) ECA2VHG101 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 100 200 200 200 200 200 200 100 100 50 (pcs) 1000 500 500 500 250 250 2000 2000 2000 2000 500 500 500 500 250 100 160 200 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2000 2000 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 500 500 2000 1000 500 500 500 500 250 250 250 2.5 350 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ NHG Standard Products Specification Lead Length Ripple tan Endur- Lead Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (hours) (mm) (mm) (mm) (mm) (V) (F) (mm) (mm) (mA r.m.s.) 1 2.2 3.3 400 4.7 10 22 33 47 1 2.2 3.3 450 4.7 10 22 33 6.3 8 10 10 10 12.5 16 16 8 10 10 10 12.5 16 16 11.2 11.5 12.5 16 20 25 25 31.5 11.5 12.5 16 20 20 25 31.5 18 30 40 50 80 145 195 250 18 29 41 49 75 115 155 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.8 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 Case size Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) ECA2GHG010( ) ECA2GHG2R2( ) ECA2GHG3R3( ) ECA2GHG4R7( ) ECA2GHG100( ) ECA2GHG220( ) ECA2GHG330( ) ECA2GHG470 ECA2WHG010( ) ECA2WHG2R2( ) ECA2WHG3R3( ) ECA2WHG4R7( ) ECA2WHG100( ) ECA2WHG220( ) ECA2WHG330 200 200 200 200 200 200 100 100 200 200 200 200 200 100 100 1000 500 500 500 500 250 (pcs) 2000 1000 500 500 500 500 250 When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 |
Price & Availability of ECA1VHG101
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |